Certification Process
Management Systems Certification
The certification process is defined in the international standard ISO 17021-1 and all accredited certification bodies follow the processes laid out in the standard.
The key stages in the certification process are
  • Client application
  • Initial Audit
  • Certification decision making
  • Surveillance
  • Reassessments
     

    AVMD2 Machinery Directive



    Course Machinery Directive (AVMD2)
          2 day training course covering the Machinery Directive 2006/42/EC
          and CE marking requirements
    Why Attend
    All machinery suppliers must ensure machinery is safe and CE marked: this means it needs to comply with all relevant directives - specifically the Machinery Directive.
    This training will deal in detail with CE marking obligations and the requirements of the Machinery Directive. The training will take you through performing risk assessments, the Essential Health and Safety Requirements, how to compile a technical file and general CE marking requirements. At the end of this course you will have a good understanding of what your company’s obligations are to comply with CE marking regulations.
    When

    8 & 9 April 2019
    9 & 10 September 2019

    Location
    Training facilities in the Macclesfield area.
    Who is it for
    Importers of machinery, machinery designers, purchasers, mechanical engineers, project managers, machine and control system designers, safety or process engineers.
    How is it delivered
    The course will consist of a combination of presentations and exercises, providing interactive participation and question and answer sessions. The days will run from 09.00 to 16.30, with refreshments and lunch provided. All participants will receive a certificate of attendance.
    Programme

    - Introduction and background to CE Marking
    - Content of the Machinery Directive
    - Risk assessments
    - Essential Health and Safety Requirements (EHSRs)
    - EN standards
    - Electrical safety
    - Safety of control systems
    - The technical file

    How much will it cost: £475 + VAT per delegate
    How to book Please ring us on 01625 412542 or
    email us at This email address is being protected from spambots. You need JavaScript enabled to view it.


     

    Terms And Conditions

    Terms and Conditions of Contract

    Definitions
    "The Company" means amtri veritas.
    "The Client" means any person(s), firm, company or body contracting with The Company for any training services.
    AV Training Courses
    The Company undertakes to provide training services which it believes meet the client's requirements. Qualified personnel will be
    assigned as appropriate. Unless expressly agreed otherwise, with the client, amtri veritas shall be entitled to subcontract an accepted
    order to third parties. The Client agrees that amtri veritas may bring observers on any course where required for training or improvement
    purposes.
    Booking training
    Application for an amtri veritas training course is effected by completing and submitting the amtri veritas booking form. The booking
    can be downloaded from the amtri veritas website or can be requested from our head office.
    Payment
    Payment should be submitted along with your booking form unless otherwise agreed. Confirmation of booking will be sent within 5
    working days of receipt of payment.
    Substitutions
    A booked delegate may be substituted for another delegate up to 5 working days before the course date. Details of the substitution
    must be submitted to and confirmed by amtri veritas.
    Transfers
    Booked delegates may transfer to another date for the same course free of charge provided notification has been received within 15
    working days before the scheduled course date. Transfers within the 15 working days will be subject to a £50+VAT administration fee.
    Cancellation
    Cancellations received within 15 working days will be subject to full fees.
    If the course is oversubscribed or cancelled by the Company due to insufficient numbers, participants will be advised 10 working days in
    advance. The company will endeavour to provide a suitable replacement booking.
    The company reserves the right to alter or cancel dates or venues and the full fee will be refunded in these cases.
    Exclusion of liability
    The company reserves the right to cancel a training course, even after the booking has been confirmed. We also reserve the right to
    change the venue or time. This shall not constitute grounds for compensation.
    The company will do the best of its ability to provide correct and accurate course content and materials.
    However, due to the changing nature of regulations and standards, the Company has no liability whatsoever for any loss or damage
    suffered.
    The company does not accept responsibility for errors or omissions in the technical information that is provided either verbally or in
    writing during the training sessions. The company does not accept responsibility for consequential damage or loss.
    Fees
    The training fees stated are per delegate and include training and documentation. Fees are exclusive of any taxes. Fees may be
    subject to alteration and should be confirmed at the time of booking. The fees do not include delegate accommodation or travel.
    Facilities & Safety
    Course attendees should observe all safety guidelines issued by the Company on arrival to the training. For courses on site at
    customer’s premises, the safety responsibilities lie with the customer.
    Copyright
    It is not allowed to make audio, video or any other form of recording of the training proceedings. Training documents shall not be
    duplicated, forwarded, utilised or made available to third parties for unauthorised purposes. Any infringement shall entitle the
    Company to seek compensation.
    All course materials are copyright of the Company and may not be reproduced in any form or media without the express written
    permission of the Company.
    The company reserves the right to adjust the content of any course to reflect any new developments.
    Training at Clients sites
    Where services are to be provided at a site provided by the Client, the client will avail the Company of the following facilities and materials:
    a training room, suitable electrical outlets, screen and projector. The client shall ensure that all facilities and equipment comply with
    applicable health and safety regulations.
    The client shall provide all the necessary insurance cover for any risks involved in relation to the supplied services for the company’s
    personnel and/or subcontractors.
    Law
    This contract shall be subject to the Law of England and Wales. Each party hereby agrees that jurisdiction for the resolution of any dispute
    shall be in the Courts of the United Kingdom.

    Internal audit training courses

    Internal audit training courses

    Our highly interactive 1 day training course will teach you the tools and techniques of the internal auditor, how to conduct an effective audit and to check you are conforming to your business processes. You will also learn how to use these tools and techniques to achieve continual business process improvement and identify any gaps in the effectiveness of your management system.

    Please get in touch with us to discuss your course requirements.

     
    © Copyright amtri veritas